Micro84 Capacitive Bluetooth Programmable Front Print Keyboard

Micro84 Capacitive Bluetooth Programmable Front Print Keyboard – NIZ84-013

The Micro84 uses 35g Electro Capacitive switching similar to Topre switching but with the addition of being compatible with Cherry MX keycaps. Also included are 40+ additional 10g/20g springs that can be added under a keycap to increase the switch weight.

The keycaps are white and grey PBT with dark grey legends on the front face of the keys, if you look from above it can look like it’s a blank keyboard, the 2 function keys work the same on most of the keys but can be programmed to perform different actions as the layout is programmable, and on the left side of the keyboard is an on/off button (hold for 3 seconds.)

Included is a detachable USB C to standard USB A white braided cable, this plugs in under the keyboard, a wire keypuller, 4 Mac keys for Mac mode, some replacement stabilizers (Filco style), a replacement on/off button and a dedicated USB transceiver.

The dedicated USB transceiver should work with this keyboard on any device that supports the USB-HID keyboard protocol (standard USB keyboard protocol), Bluetooth support is not needed, WinXP, Win7, Win8, Win10, Linux, Mac, Ios, Android and other operating systems including BIOS operations. It will only work with your Niz keyboard.

Bluetooth compatibility, I had problems connecting to a CSR V4.0 Bluetooth adaptor but the keyboard connected fine to my Galaxy Tab A with V4.2 Bluetooth.